Autowatch Ghost Installation
Autowatch Ghost is an immobiliser that guards you against hacking and key-cloning. It also helps prevent theft of your vehicle. ghost car immobiliser can lower your insurance costs and you may be eligible for incentives.
Discreet and easy to use, and easy to use, Ghost immobiliser is built into the vehicle's ECU. This makes it impossible to start the engine without a secret PIN code.
TASSA Approved
Autowatch Ghost is the best method to prevent your car from being taken away by key copying. It has been approved by TASSA. This is the most recent technology in car security. It stops thieves from stealing your key fobs, and will also stop your vehicle from starting when your keys have been cloned.
This next-generation device connects to your vehicle's CAN data network. A personalized PIN code is entered through the vehicles standard buttons on the dashboard or steering wheel. The Ghost is then able to stop the engine from beginning and can be programmed to a number of different settings such as Gear Change Blocking, Stall on Start or Lock Gearbox (vehicle dependent). It is completely undetectable and does not use radio frequency signals so that it is not detected by RF scanning equipment or a 'code grabber'.
The Ghost is a small weatherproof device that is completely sealed. It can be placed on the dashboard or concealed within the vehicle. Unlike other alarm and immobiliser devices on the market this is not a Thatcham Category approved product but is recognised by insurance companies as a reliable anti-theft system. It comes with a 5 year warranty.
The TASSA verification process assures that any installation work carried out on the Ghost will be done so by a trained and skilled installer. This gives the insurer, the customer and police confidence in the quality of any installation that is completed. It also ensures that the installers adhere to the instructions of the product manufacturer and properly install the product. Installers who are TASSA members are committed to excellence, and are determined to make a difference in the fight against crime.
Compatible with a variety of vehicles
The Autowatch Ghost 2 is a modern immobiliser designed to protect your vehicle against modern day key copying. The PIN code system of the Autowatch Ghost 2 is incorporated into the vehicle's ECU and makes it more difficult for thieves to copy keys or hack into the system. Additionally the device is discrete and can be easily fitted in a wide range of vehicles from minivans to sports cars. It's also weatherproof and small enough to hide away from view which makes it more difficult for thieves to find.
The installation procedure for the Ghost is simple and does not require any additional wiring. It is compatible with numerous vehicles and communicates via the data network of the vehicle CAN. It can also be deactivated or shut off from the main screen of the vehicle. The device is compatible with many mobile apps that allow you to control the security of your vehicle remotely.
Despite its many advantages, despite its many advantages, Ghost has certain issues that could arise after it is installed. These issues can be caused by a variety of factors like malfunctioning wiring or a non-compliant mobile application. In these situations the best option is to consult an expert installer to resolve the problem.
Users also experience difficulty getting into the sequence of disarming the Ghost. This is usually due to users not rehearsing or remembering the correct sequence. The manual for the device has an emergency code which can be used in the event that such issues occur.
Discreet
Autowatch Ghost is an advanced and discreet security system that protects against theft of vehicles. It uses the vehicle's CAN data networks to work and is completely invisible to thieves, making it a highly effective deterrent. It can also be activated by security systems like car alarms and sends real-time alerts to its owner. These features can help the police find your vehicle in the event of theft.
This system is compatible with most automobiles and can be fitted in less than an hour. It is a TASSA approved aftermarket device that is compatible with vehicle trackers. Some insurance companies even recognise it. It's also tamper-proof and quiet, so criminals will not be able to hear its operation. Additionally it can be programmed to require a Ghost immobiliser can be programmed to require a PIN that can be as long as 20 digits which is almost impossible to guess.
Ghost is only available only in the Service/Valet Mode. This prevents you accidentally giving your PIN number to anyone who requires access to the computer system of your vehicle, such as mechanics. The Ghost comes with five-year guarantee.
The Autowatch Ghost immobiliser is a revolutionary security system that prevents key copying, ECU hacking and car theft. It's an aftermarket CAN bus device that's an excellent alternative for both older and new vehicles. It's easy to install and operates quietly, so it can be installed in any vehicle without cutting wires. You can also change your pin in a matter of minutes to make sure that only you are aware of it. The system is nearly unnoticeable because it doesn't use RF scanning technology or code-grabbing technology.
Easy to use
Autowatch Ghost is an innovative and effective security system designed to prevent theft of vehicles by preventing the engine from running. It uses a personalised code crafted by the owner of the vehicle, which must be entered prior to the car can begin. This advanced technology elevates the overall security measures of your vehicle and makes it a top choice for many motorists. The process of installing it isn't without its challenges. It requires careful planning and attention to the smallest of details. This includes ensuring compatibility, relying on professional expertise in compliance with legal regulations, and comprehensively understanding the Ghost II's operation dynamics. Prioritising these aspects ensures an efficient installation and optimal functionality.
Unlike conventional systems, the Ghost II is silent and is not able to be detected by thieves. It is also compact and weatherproof, making it hard to break in. It is also compatible with CAN and Lenastark, which permits it to be used in many different vehicles. It can even be utilized in vehicles that require isolation of the battery for maintenance. The Ghost 2 has a Transport Mode that disables the device while your car is being rented or loaned.
To use the Ghost 2, you must have a unique PIN code that must be entered prior to starting the vehicle. The software will set an initial PIN code for you, but for your own security it is recommended to change it as quickly as you can. The device can enter sleep mode to preserve the battery, however should it detect an engine management system, it will wake up and stop the vehicle from beginning. This feature is able to be disabled in the Settings menu. It is advisable to use the Ghost immobiliser when your vehicle is being driven, and to secure it prior to leaving it unattended.
Easy to install
The Autowatch Ghost II, an advanced security system, deters car thefts by disabling a vehicle's engine. It operates by using a number that is exclusive to the owner, making it a formidable deterrent. However, the installation process requires careful preparation and attention to particulars. By ensuring compatibility, relying upon professional expertise and adhering to the legal requirements and comprehensively understanding the system's dynamics will ensure a seamless installation process and get the most benefit from this security solution.
This unique CANbus immobiliser from Autowatch is simple to install and operates in a quiet manner, so that criminals are unable to hear it working. It utilizes the CAN bus to communicate with your vehicle and is compatible with a wide range of vehicles. It is a real revolution in vehicle security. It protects you from key cloning and theft from your vehicle. It's weatherproof and compact, so it's hard for criminals to find it or modify it.
You will need to locate the CAN High (CAN H) and CAN Low (CAN L) Wires in the wiring schematic of your vehicle before you can start installing the Ghost Immobiliser. Then, connect the high CAN wire to the low and the CAN low to the ECU. The wires are located under the dashboard, or close to the engine.
It is best to hire an installer who is licensed and reliable for the installation of the Ghost immobiliser. This way, you will be sure that the system is properly installed and won't interfere with the functionality of your vehicle. The installer will also be able to provide advice on how to best make use of your new device.