Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It is discrete It does not include LED indicators or key fobs and is hidden in the vehicle's wiring.
The user can also disable the system for a short period of time by using Transport Mode when renting out their car. This guide will walk you through the installation process of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning attacks and relay attacks. The system links directly to your car's ECU and is protected by a unique PIN code that you choose. It's inaccessible to thieves using scanners for diagnostics or other modern methods, and is not able to be disabled by circuit cuts.
The system is simple to use, but it is essential to have a professional installation to ensure a clean and secure connection to your vehicle's ECU. Installers approved by Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking system or alarm system to complete your vehicle's security package.
To avoid an accidental deployment of short circuits or airbags The installer must first disconnect your battery. Once the battery is disconnected, the installer can safely begin working. More Material can be used to ensure precise connections. A multimeter can be used to test electrical values. Cable ties and insulation tape are also necessary for securing connections and keeping wiring neat. The Ghost Immobiliser user manual will provide specific instructions specific to your particular model.
During the installation, it is important to choose an area for grounding that is free of paint and debris. Installers should also make sure that the immobiliser's wires CAN H & can L are connected to the proper ECU ports. Based on the model, these wires could need to be soldered or plugged into. A top-quality connector is recommended to ensure a sturdy and secure connection.
Once the install is complete, the customer can activate after the installation is complete, the customer can activate Transport Mode. This allows the vehicle to be used by valet parking or mechanics without needing to know the pin code. The customer must press the service icon on the dashboard five times over 2 seconds. The system will confirm this by displaying five indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's an excellent choice for those who rent their vehicles frequently on platforms such as Turo. Immobilisers can also reduce insurance premiums, since it greatly reduces the chance of theft.
Getting Started
It's not difficult to come up with an autowatch immobiliser in order to guard your car from theft. The device stops your car from starting if someone steals or copies your key. It's possible due to its advanced technology that prevents the engine from starting until the correct PIN code is entered.
The device is connected to the vehicle's bus network CAN and allows direct communication with the ECU. It uses the buttons on your steering wheel and dashboard to create a unique sequence which only you know. This makes it impossible for anyone else to start your car. This is the most secure way to safeguard your pride and joy. It will keep its value intact in the event that you decide to sell it.
Installing an immobiliser from Ghost is simple, but you must follow the instructions to avoid electrical issues and system malfunctions. You'll need to find a 12V power source and a suitable grounding for the chassis of your car. Then, you can begin connecting the wires that will be used to activate the immobiliser. Be sure to use high-quality connectors and soldering methods to ensure a solid connection. Also, ensure that you protect the connections by insulating them with heat shrink tubing and insulation tape to protect them from electrical short circuits and other problems.
After the wires have been connected, you can reconnect the battery and then turn on the engine to test the immobiliser's function. After you've verified that everything is working properly and you are satisfied, you can place the immobiliser in a secure position inside the vehicle. Be sure to hide it securely so that a thief cannot get it into a compromising position.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified This means it complies with the highest standards of security and is an excellent deterrent to car thieves. It is a superior defense against key cloning, hacking and relay attacks. It cannot be disabled without knowing the code. It is also simple to use and is able to be put into a service valet mode so that your vehicle will not be activated when you bring it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to stop theft of vehicles. It is directly connected to the car's CAN bus network and communicates with the ECU and ECU, making it a virtually undetectable addition to your car. The Ghost Immobiliser does not interfere with the factory settings of your vehicle unlike other aftermarket systems that require the removal of circuit elements.
The system is also undetectable by thieves using scanners for diagnostics. The system does not send or receive radio frequency signals, but instead uses CAN data to communication with your ECU. Furthermore, it doesn't require any modification to your car's existing key fobs.
Enter your sequence for disarming (either two or one button) and then turn on the ignition of your vehicle to use Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. After this, you can start your car and drive away with peace of mind.
Once installed Once installed, the Ghost Immobiliser will protect your car from key cloning and hacking, while protecting the value of your most prized possession. If you have to hand over your vehicle for service or valet parking The Ghost Immobiliser will be temporarily disabled in Transport Mode.
You'll require a continuous power source (12V) in addition to a grounding source to complete the installation of the Ghost immobiliser. Be sure that they are well-insulated and safe to touch. It's also recommended to use cable ties to tie and secure the wires, since this will reduce the risk of tampering by potential thieves. Make sure you verify the position of these points to avoid mistakes, and mark them with a piece of tape or label. Verify every connection for signs that they're wearing out. Connectors that are loose could cause malfunctions in the system, so make sure they're securely fixed and well-insulated. Make sure to test your Ghost Immobiliser after the installation is completed. This will make sure that the unit functions properly and that all connections are safe and well-insulated. Be sure to fix any issues immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that works seamlessly with your vehicle's ECU to stop the motor from starting without authorization. Its innovative technology safeguards your vehicle against hacking and key cloning as well as other methods employed by thieves to steal vehicles. The Ghost also works in conjunction with other alarm and tracking systems to provide the best protection for your vehicle. This system's unmatched features and secluded design make it a preferred option for car enthusiasts and security-conscious drivers alike.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow all steps of the installation process. Check the wiring diagram for the vehicle to aid you in locating and connecting the wires. The next step is to determine the grounding and power sources. Once these are found you'll be required to mark them so that they're easy to identify when installing. It's important to use high-quality materials and tools. Hand tools are a must in making connections that are precise and a multimeter can check electrical values and ensure security. Insulation tape and cable ties will help keep all connections neat and tidy. A Ghost-specific user manual is also available.
It is important to test the system prior installing it. Enter the PIN code into the system and then start the vehicle. This step will confirm the immobiliser works as intended and will stop vehicle starts that are not authorized. It is recommended that you perform this routinely as part of your routine inspections of your vehicle to ensure that the system is always functioning correctly.
Once the installation is complete, you can drive your vehicle with confidence. The Ghost will protect your car from would-be car thieves. It will ensure that no one is able to escape with your car even if they don't have the correct PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker that detects any attempts at theft or tampering. This will allow you to track your vehicle if it is stolen.
The Ghost is compatible with a variety of vehicles, including those from the majority of major manufacturers. If you are interested in protecting your car with this innovative device, contact Monty's Locksmith today to find out more about our installation and maintenance options. We are a TASSA Registered installer This certification ensures that we adhere to strict standards and procedures for installing our products. This assures customers insurance companies, customers, and law enforcement agencies that all installations are done safely and in a safe manner.