Ghost Immobiliser Fitting
Protect your vehicle from theft of keys, cloning and hacking with the world's first aftermarket CAN immobiliser. The Ghost app and GPS tracking can be linked to the immobiliser to send you alerts when your vehicle is stolen or tampered with.
Installing a Ghost immobiliser is a breeze for a skilled technician. Making use of the correct tools, insulation tape and heat shrink tubing are essential.
Getting Started
Contrary to physical theft protection devices such as wheel locks or car alarms, ghost immobilisers protect your vehicle without the use of LED indications or key fobs. They are connected directly to the ECU CAN data network and can only be activated after entering a PIN. This gives a greater level of security against key hacking, ECU swapping and cloning.
Installing a ghost immobiliser Birmingham requires a high level of agility and precision. It's like walking through a minefield. A mistake could result in serious damage to your vehicle's electrical circuits. It is essential to comprehend the installation procedure and prepare your vehicle correctly.
ghost immobiliser review is necessary to remove interior panels from the vehicle to make room for the immobiliser. Once you have found the ideal place to hide it, use cable tie to fix it. Clean your wiring by making sure that loose wires are tied down and using insulation tape to cover any exposed connections. This reduces the chance of an accidental short circuit while also improving the appearance and reducing the risk of theft.
Then, locate a source of constant 12V power as well as a grounding location for the ghost immobiliser. Once you've located these connections, test the power cables using a multimeter to ensure they're delivering the same voltage. Then, connect the CAN H and L wires from the immobiliser to the designated power source and grounding point.
It's important that you ensure that all connections are checked and examine the immobiliser for signs of corrosion. It is also important to test the system to make sure it is working properly by entering a PIN number and then starting the engine. This should be a regular part of your daily routine as it will allow you to spot any issues that may arise early. Regular testing also helps to improve the longevity of the device and ensure that it is functioning at its best.
Preparing the Vehicle
Installing a Ghost immobiliser requires the right expertise and tools. A wiring diagram is essential for locating the correct wires, making precise connections, and ensuring safety. A multimeter can be used to check the electrical properties and ensure security. Cable tie and insulation tape can be used to secure connections and shield them from alteration. Finally, a user manual will give you specific instructions specifically tailored to the Ghost Immobiliser model you have.
Once installed, the ghost immobiliser will stop unauthorised engine start-ups by requiring that the owner enter a unique code using the buttons on the console or steering wheel. The code can be altered at any time by the owner by hand or remotely using an app on mobile. The device is also quiet and is undetectable by thieves since it doesn't emit any radio frequencies.
A ghost immobiliser is connected to the CAN bus of the vehicle, which is a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals sent by ECUs and shuts down the engine when a false signal is detected. The system is weatherproof and tamper-proof. It has no keys or LED indicators that could draw thieves' attention.
It can be positioned behind or in a less noticeable location so that it's not obvious to thieves and won't hinder vehicle's performance. It can even be mounted in a small container and makes it less likely to be spotted during an inspection by unscrupulous salespeople for cars.
Its stealthy operation, along with its integration into the vehicle's CAN-bus system, is an effective deterrent to car theft methods such as signal relay attacks and key copying. Combining the system with other security measures will create an effective barrier to frustrate even the most persistent thieves. Many insurance companies suggest or require ghost immobilisers because they can cut down on monthly premiums.
Making Connections
Contrary to traditional security systems which are heard by thieves, ghost immobilisers work silently to keep them from being aware that your vehicle is turned on. They also prevent high-tech methods of theft, such as OBD hacking. Installing them without leaving permanent marks on your car is a great option for those who plan to sell the car in the near future.
The Autowatch Ghost 2 CANbus immobiliser is one of the latest and most reliable solutions to stop car theft. It blocks your engine through the CAN data network and generates a unique PIN code, which is difficult for criminals to guess. It can be fitted in a variety of vehicles and integrates with a number of features already in place, such as car alarms, GPS trackers, steering wheel locks, and door lock bypass systems.
If you choose to install an Ghost immobiliser, make sure to consult the wiring diagram for your particular vehicle model to determine the wires that require connecting. Verify their positions to ensure they are exact, and label them or tape them to help keep track of them. You will also have to locate a constant power source (12V) for the system, as well as the grounding. Once you have all the required components, you can start connecting them to complete the installation.
The ghost immobiliser will not allow your vehicle to start until you enter a pin code via the buttons on the steering wheel or dashboard. This will stop ECU hacking, key cloning, and other methods of theft. In addition, it could be used in conjunction with other Thatcham-approved security equipment, such as alarms and tyre clamps to give your vehicle an additional degree of security.
As the UK automotive industry grows, so do the options available for protecting your vehicle. There are a myriad of ways for thieves to get into your car and steal it, so it's important to do all you can to ensure that it isn't stolen. This is why ghost immobilisers are very popular among responsible car owners.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU and prevent the engine from running until a specific PIN code is entered. This makes it extremely difficult for thieves to copy your key fob and start your car, and more difficult to disable the system by hacking into its electronic components.
Ghost Immobilisers are also able to be utilized together with GPS tracking devices that can help you track your vehicle's location and identify it if it's stolen. This isn't an option that is commonly used in security products sold by the aftermarket however it's an excellent way to enhance your security and provide assurance that your vehicle is always protected.
In addition to providing increased security, the Ghost-II immobiliser provides a simple user experience by removing the requirement for additional key fobs and devices. It has a simple, user-friendly PIN code entry that can be integrated seamlessly with your daily routine. It also offers convenience features and deactivation options that let you temporarily disable the immobiliser so that you can park or service your vehicle.
Before beginning the installation process, familiarize yourself with the vehicle's wiring and prepare the tools. A basic set of hand tools will allow you the ability to make precise connections, while a multimeter can help determine electrical values. Insulation tape and heat-shrink tubing are essential to protect connections from short circuits. Cable ties can be used to secure wiring. It is also essential to work in an area that is well-lit, and wear safety gear when using electrical components and tools.
After you've completed the installation you should test the Ghost immobiliser to verify that it's functioning properly. Try to start the car without entering the PIN. If this doesn't work, you'll need to test the system again and conduct a more thorough examination of the connections.
In contrast to other security systems unlike other security systems, unlike other security systems, the Ghost Immobiliser is a covert device that cannot be detected by thieves and is much more effective than conventional physical deterrents such as wheel clamps or steering locks. It is TASSA acknowledged and approved by a few insurance companies, which makes it an investment that is cost-effective and will give you peace of mind you need.